It is currently Fri Jun 24, 2022 7:59 pm

All times are UTC - 6 hours




Post new topic Reply to topic  [ 1418 posts ]  Go to page Previous  1 ... 138, 139, 140, 141, 142
Author Message
 Post subject: Re: The Notorious B.E.N. Flying/Building/Repairing Blog
PostPosted: Sat Apr 30, 2022 9:43 pm 
Offline

Joined: Thu Aug 25, 2011 9:14 pm
Posts: 2192
Location: Bryan, TX
Minus putting the ball link on the end of the pushrod for the throttle on the AJ Raven and minor adjustments, it is finally done. The biggest problem was figuring how what bend in the pushrod was needed once it was past the firewall. Next up will be the choke connection.

I'm also the owner of a Flex Innovations CAP 232 now. But it's going to have to wait until I finish the Raven and maybe also the Skeeter 40.


Attachments:
20220427_212516.jpg
20220427_212516.jpg [ 1.63 MiB | Viewed 191 times ]
20220427_212525.jpg
20220427_212525.jpg [ 1.88 MiB | Viewed 191 times ]
20220430_200806.jpg
20220430_200806.jpg [ 1.58 MiB | Viewed 191 times ]
20220430_152711.jpg
20220430_152711.jpg [ 1.72 MiB | Viewed 191 times ]

_________________
A.K.A. ben_beyer
Top
 Profile  
 
 Post subject: Re: The Notorious B.E.N. Flying/Building/Repairing Blog
PostPosted: Mon May 02, 2022 4:22 am 
Offline

Joined: Thu Aug 25, 2011 9:14 pm
Posts: 2192
Location: Bryan, TX
I didn't have time to post this yesterday evening but I have the choke pushrod and bellcrank just about ready. I need to put another ball link on the servo horn and I'll go ahead and mount the cowling before I do the final engine install along with getting the muffler Honda bonded and cutting the cowl for the muffler.


Attachments:
20220501_174725.jpg
20220501_174725.jpg [ 1.53 MiB | Viewed 186 times ]
20220501_174833.jpg
20220501_174833.jpg [ 1.41 MiB | Viewed 186 times ]
20220501_174947.jpg
20220501_174947.jpg [ 1.63 MiB | Viewed 186 times ]
20220501_201948.jpg
20220501_201948.jpg [ 872.08 KiB | Viewed 186 times ]
20220501_201957.jpg
20220501_201957.jpg [ 1.39 MiB | Viewed 186 times ]
20220501_202139.jpg
20220501_202139.jpg [ 1.68 MiB | Viewed 186 times ]
20220501_202148.jpg
20220501_202148.jpg [ 1.44 MiB | Viewed 186 times ]

_________________
A.K.A. ben_beyer
Top
 Profile  
 
 Post subject: Re: The Notorious B.E.N. Flying/Building/Repairing Blog
PostPosted: Mon May 09, 2022 7:06 pm 
Offline

Joined: Thu Aug 25, 2011 9:14 pm
Posts: 2192
Location: Bryan, TX
There was a flying club meeting on Saturday but my wife was out of town and I had no way to charge up this computer.

Three flights on the Mamba and I wanted to try my Flex 16x6 wood prop, but the spinner needs to more clearance. I didn't notice this until I had snugged up the screw that holds the spinner on but it's only minor damage. I'll see about getting the cutout in the spinner slightly enlarged this week.

I also went ahead and ordered the batteries for the CAP since SMC is having supply issues. I went with the Graphene 6S 4000's.


Attachments:
20220507_101652.jpg
20220507_101652.jpg [ 737.23 KiB | Viewed 164 times ]

_________________
A.K.A. ben_beyer
Top
 Profile  
 
 Post subject: Re: The Notorious B.E.N. Flying/Building/Repairing Blog
PostPosted: Tue May 10, 2022 9:05 pm 
Offline

Joined: Thu Aug 25, 2011 9:14 pm
Posts: 2192
Location: Bryan, TX
Tonight I broke out the Hondabond and put the muffler on the VVRC 35. I need to check to see if the blue loctite is still acceptable for muffler bolts!


Attachments:
20220510_205729.jpg
20220510_205729.jpg [ 1.09 MiB | Viewed 159 times ]

_________________
A.K.A. ben_beyer
Top
 Profile  
 
 Post subject: Re: The Notorious B.E.N. Flying/Building/Repairing Blog
PostPosted: Sun May 29, 2022 8:01 am 
Offline

Joined: Thu Aug 25, 2011 9:14 pm
Posts: 2192
Location: Bryan, TX
Yesterday was the first RC I was able to commit for some weeks unfortunately. A part of the reason to get the Mamba and change up what I've been flying to be able to fly with others. So yesterday morning I charged up some batteries and headed to the field. There were five other people taking advantage of the relatively cooler morning temperatures to do some flying. It's mostly a retired crowd but people that do some flying so not ones to just come out to complain for a few hours.

I did one flight on the Mamba with the stock prop and then changed over to the wood 16x6. I like the wood a little better and since the Mamba and CAP use the same spinner, I ordered an Extreme Flight 63mm spinner to use with the Mamba and not mess around with trimming the one it came with just yet.


Attachments:
20220528_122712.jpg
20220528_122712.jpg [ 1.99 MiB | Viewed 107 times ]

_________________
A.K.A. ben_beyer
Top
 Profile  
 
 Post subject: Re: The Notorious B.E.N. Flying/Building/Repairing Blog
PostPosted: Fri Jun 10, 2022 7:24 am 
Offline
User avatar

Joined: Mon Jul 25, 2011 11:58 am
Posts: 4983
Location: Austin, TX
So what do you think of the big Mamba? I've got the little one and honestly it's not my favorite. I think a large part of that is the way they set up the Aura, with a metric crap-ton of expo. It just feels so weird, especially on elevator. I've gone in and adjusted some of the settings, but haven't been able to fly it since. While in there I noticed there is a setting to just let the TX handle all the expo, so I may try that so I can tweak without having to take my laptop to the field.

_________________
Chris Boultinghouse


Top
 Profile  
 
 Post subject: Re: The Notorious B.E.N. Flying/Building/Repairing Blog
PostPosted: Tue Jun 14, 2022 11:51 am 
Offline

Joined: Thu Aug 25, 2011 9:14 pm
Posts: 2192
Location: Bryan, TX
It's different and a lot of that I believe is due to the nature of being a bipe. I could see how a smaller version could be ever more squirrely at times.

I also did adjust some of their settings to be less sensitive and match my flying style.

_________________
A.K.A. ben_beyer


Top
 Profile  
 
 Post subject: Re: The Notorious B.E.N. Flying/Building/Repairing Blog
PostPosted: Sat Jun 18, 2022 9:20 pm 
Offline

Joined: Thu Aug 25, 2011 9:14 pm
Posts: 2192
Location: Bryan, TX
Flights 16, 17, and 18 on the Mamba 60 today and with the Extreme Flight spinner. I really like the way it looks now and the Mambe seemed to be a little tamer in certain attitudes but it's probably just more getting used to how it flies.


Attachments:
20220618_104554.jpg
20220618_104554.jpg [ 1.9 MiB | Viewed 29 times ]

_________________
A.K.A. ben_beyer
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1418 posts ]  Go to page Previous  1 ... 138, 139, 140, 141, 142

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group