EZnov is very (VERY) proud to annonce its new line of flight controlers 100% made in France (designed and produced in France in our office).
It's composed of two flight stabilizers of the latest generation :NEURONHardware :
Latest generation, 9 axis sensor (MPU-9250)
Latest generation STM32F4 microcontroler with floating point unit
Rock solid power stage (no more sat locks) up to 8.4V
Very small : 23.15 x 34.5 x 13.6 mm
External USB connector for more installation flexibility (cable and adapter provided in the box)
Unplug the USB adapter and you can plug a Bluetooth module instead (same cable).
3 bottom case colors to customize your unit (time limited offer)
Every connector is electrically protected
3M Very High Bond double sided pad providedFeatures:
Handles (via different firmwares available to everyone without additional cost) all size helicopters, quads and planes with the same level of performance.
Built-in RPM governor
One built-in sat connector with smart bind (no bind plug nor PC needed to bind)
You can connect a second sat via an adapter
Handles all serial output receivers (HoTT, SRXL, SBUS/SBUS2, JR XBus Mode B and Mode A, PWM sum of course, plus DSM2 and DSMX sats), one wire per channel receivers are supported through an adapter (e.g. SBUS)Software:
Extreme performance, incredible feeling
Setup and tuning as simple as possible
FREE setup terminal on PC (USB and BT) and Android (BT), all features availables, including firmware update, load/save configuration (compatible files between PC and Android)
iPhone software is work in progress, via a specific Bluetooth Low Energy device available later
Receiver auto-configuration, the unit detects the receiver type and configures automatically the channel assignment, throws, neutrals, reverses, etc at each startup.
Each firmware type (quad, heli, plane) has its own GUI, software user interface is totally adapted for each model type
Upgrading firmware doesn't mean upgrading PC / Android software. You can upgrade one unit's firmware and keep another one on a previous firmware, each one will have the adequate user interface.
RPM governor auto-configuration, ne need to set gear ratio, etc. just plug the sensor, setup a flat throttle curve and fly (both nitro and elec)
Rescue mode for helis, with pitch management
Self level mode for quads and planesIntroductory pricing: 130€ (approx $150)
Available: VERY SOON (production already started!)AND BIG BROTHER WITH NO OFFICIAL NAME YET
ULTRA POWERFUL latest generation microcontroler STM32F4 with floating point unit
10 connectors for a high power installation and plug tons of servos
2 smart bind sats connectors
Support for H4 helis, hexacopters, octocopters, planes with multiple servos per function, etc.
Built-in barometer (altitude hold)
Support for external GPS (position hold)
Built-in FLASH memory for complete logging of any flight parameter, and analyse them directly in the softwareAvailable in: a few months