RCTodayShow.com
http://www.rctodayshow.com/forum/

RC Today Show 151: Happy New Year!
http://www.rctodayshow.com/forum/viewtopic.php?f=3&t=2013
Page 2 of 5

Author:  Only Fine Helis [ Sun Jan 11, 2015 5:03 pm ]
Post subject:  Re: RC Today Show 151: Happy New Year!

I normally fly without a strap. I have never flown with a jeti, but I have held one and it seemed comfortable to me. It looks as if it might balance funny or have a weird CG but when you pick it up it's not that way.

Author:  jmiceli11 [ Sun Jan 11, 2015 6:56 pm ]
Post subject:  Re: RC Today Show 151: Happy New Year!

Yeah Chris get the Jeti! I just ordered the Oxy 3 after listening to the show. Talk about enabling. :o

Author:  Nunez [ Sun Jan 11, 2015 8:34 pm ]
Post subject:  Re: RC Today Show 151: Happy New Year!

Great podcasts again!!! I think im starting to get addicted :D

Author:  TheBum [ Mon Jan 12, 2015 10:45 pm ]
Post subject:  Re: RC Today Show 151: Happy New Year!

There is a revised manual for the MZ-24 that's a lot more thorough.

http://www.openhobby.com/front/support_ ... searchstr=

Author:  Only Fine Helis [ Tue Jan 13, 2015 5:47 am ]
Post subject:  Re: RC Today Show 151: Happy New Year!

TheBum wrote:
There is a revised manual for the MZ-24 that's a lot more thorough.

http://www.openhobby.com/front/support_ ... searchstr=


Much Better!

Author:  cwojcik [ Tue Jan 13, 2015 10:16 am ]
Post subject:  Re: RC Today Show 151: Happy New Year!

I usually fly helis and airplanes with a strap, and DLG's and FPV with no strap. I felt extremely weird flying the DS-16 with no strap, it was heavy and kind of slippery. But once I used the strap it felt wonderful.

Author:  JustPlaneChris [ Tue Jan 13, 2015 10:47 am ]
Post subject:  Re: RC Today Show 151: Happy New Year!

Only Fine Helis wrote:
TheBum wrote:
There is a revised manual for the MZ-24 that's a lot more thorough.

http://www.openhobby.com/front/support_ ... searchstr=


Much Better!
Yes, that one is a lot better than the one I found with a Google search!

Author:  TheBum [ Tue Jan 13, 2015 11:24 am ]
Post subject:  Re: RC Today Show 151: Happy New Year!

Hmm, so you didn't go to YOUR SPONSOR'S website to look for it? Shame, shame. ;)

Author:  JustPlaneChris [ Tue Jan 13, 2015 12:31 pm ]
Post subject:  Re: RC Today Show 151: Happy New Year!

Nope, Google was my first stop. I figured I'd be a typical user. Oh wait, in that case I wouldn't have even looked for a manual! :)

Author:  TheBum [ Tue Jan 13, 2015 12:49 pm ]
Post subject:  Re: RC Today Show 151: Happy New Year!

I had asked on the RCG MZ-24 thread about sequencers and Mannie sent me a model file with a sequencer defined using mixes. I was glad to see that a sequencer example made it into the new manual. The description of how a mix works in general was pretty decent, certainly better than anything JR or Spektrum has put out, but it still leaves me wanting. Ideally, I'd like to see it in mathematical form.

Page 2 of 5 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/