RCTodayShow.com
http://www.rctodayshow.com/forum/

RC Today Show 155: We'll be CNC'n You
http://www.rctodayshow.com/forum/viewtopic.php?f=3&t=2119
Page 3 of 5

Author:  Borneoben [ Tue Mar 24, 2015 8:05 am ]
Post subject:  Re: RC Today Show 155: We'll be CNC'n You

Steve

Check out the Taranis thread for pics of Chris new case...
viewtopic.php?p=25692#p25692

Ill post a couple pictures in while of where i currently am with the CNC build..

I may start a thread as well. I hadn't thought about it but i guess if your interested i can do that.

Cheers

Ben

Author:  stevec [ Tue Mar 24, 2015 8:26 am ]
Post subject:  Re: RC Today Show 155: We'll be CNC'n You

cheers Ben.

Author:  tonkajeep34 [ Tue Mar 24, 2015 8:59 am ]
Post subject:  Re: RC Today Show 155: We'll be CNC'n You

JustPlaneChris wrote:
tonkajeep34 wrote:
I never would have thought you could "etch" fur like they did.
Egads, can you imagine the stench?? :shock: :?


Hadn't even thought of that... yeah I bet.


Ben I'd love to see pics of the build too! This whole CNC/3d thing has really got me hooked now.

Author:  Borneoben [ Tue Mar 24, 2015 11:33 am ]
Post subject:  Re: RC Today Show 155: We'll be CNC'n You

Ok guys i started a build thread for those who are interested HERE


Cheers

Author:  stevec [ Tue Mar 24, 2015 11:45 am ]
Post subject:  Re: RC Today Show 155: We'll be CNC'n You

Cool


Sent from my iPhone using Tapatalk

Author:  JWeber [ Tue Mar 24, 2015 12:50 pm ]
Post subject:  Re: RC Today Show 155: We'll be CNC'n You

Chris, which current sensor did you use on your 380 build?

Author:  JustPlaneChris [ Tue Mar 24, 2015 1:31 pm ]
Post subject:  Re: RC Today Show 155: We'll be CNC'n You

JWeber wrote:
Chris, which current sensor did you use on your 380 build?

I went with the 150, which is massive overkill. The 40 probably would have been enough, but it's an awkward shape. So, the 150 is the next step up. It worked out OK, it tucks away in the back of the frame since I'm using the quick disconnect battery method.

Author:  OnTheSnap [ Tue Mar 24, 2015 5:47 pm ]
Post subject:  Re: RC Today Show 155: We'll be CNC'n You

Very strange. I run Xnova 4530-500 on the 700's, and the Xnova 4025-560 on the G570's. Flights are 3m, and the motors are very hot. :? :? :? :? :? :? :? In the 4530 case, I generally use a fan to cool the motor after a flight to mitigate main gear strips.

No magic battery or motor technology for Alex. Just packs at 5% after every 3m flight. I just started charging to 4.22V and now I'm landing at like 12% after 3m. :o :o No bursting packs yet. This has actually helped.

Kidding aside, I love the Xnova motors. Extremely powerful. With a very effective cooling fan. But they have not been more efficient IMO. Crazy power. Pretty darn hot. Short flights. No free lunch.

Author:  Only Fine Helis [ Tue Mar 24, 2015 6:18 pm ]
Post subject:  Re: RC Today Show 155: We'll be CNC'n You

Well Alex,

Maybe the difference is that you need to try a DT?

:-)

Author:  OnTheSnap [ Tue Mar 24, 2015 6:26 pm ]
Post subject:  Re: RC Today Show 155: We'll be CNC'n You

Only Fine Helis wrote:
Well Alex,

Maybe the difference is that you need to try a DT?

:-)



Maybe. Or stop compensating with headspeed and stick banging. :face

Page 3 of 5 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/