RCTodayShow.com
http://www.rctodayshow.com/forum/

RC Today Show 159: The Finale
http://www.rctodayshow.com/forum/viewtopic.php?f=3&t=2266
Page 1 of 2

Author:  JustPlaneChris [ Sun May 29, 2016 6:41 pm ]
Post subject:  RC Today Show 159: The Finale

In this episode: This is it, the last show! Thanks for all the support, and we hope to see you out and about once in a while.

http://rctodayshow.com/2016/05/rc-today ... he-finale/

Attachments:
IMG_18401.jpg
IMG_18401.jpg [ 637.28 KiB | Viewed 3941 times ]
IMG_18421 - Copy.jpg
IMG_18421 - Copy.jpg [ 607.44 KiB | Viewed 3941 times ]

Author:  karl k [ Sun May 29, 2016 9:54 pm ]
Post subject:  Re: RC Today Show 159: The Finale

Have a twenty for me, guys.

Author:  scrtsqrl [ Mon May 30, 2016 7:22 am ]
Post subject:  Re: RC Today Show 159: The Finale

Many thanks boys! It's been a good run.
You'll be missed...
But I'm sure we'll see y'all around again.

:)

PS- Chris, what plane are you building?
Ben, are you still documenting the H-60? If so where?
Bobby, boys require the highest maintenance between now and 12...Get them into the hobby...then you'll have ready flying buddies for a lifetime. After 12, they'll slowly get on their own program.

Author:  exfokkerflyer [ Mon May 30, 2016 7:44 am ]
Post subject:  Re: RC Today Show 159: The Finale

I was hoping the reason for the long wait for the finale was that you guys had changed your minds. While it's sad for me to learn that is not the case, I understand and wish you gentlemen well! With the RC Today show being gone, there is definitely a void in the RC podcast world...

Thanks for the shows and the long hours!


Sent from my iPhone using Tapatalk

Author:  JustPlaneChris [ Mon May 30, 2016 8:15 am ]
Post subject:  Re: RC Today Show 159: The Finale

scrtsqrl wrote:
PS- Chris, what plane are you building?


This: http://www.zenithair.net/introduction-cruzer/

It's not a curvy beauty like the one you're selling, but it's about as simple to build as metal airplanes get. Ben used his fancy CNC machine to do my wing rib form blocks, which will save a bit of tedious tracing and cutting. :)

Attachments:
formblocks.jpg
formblocks.jpg [ 99.06 KiB | Viewed 3907 times ]

Author:  scrtsqrl [ Mon May 30, 2016 6:50 pm ]
Post subject:  Re: RC Today Show 159: The Finale

JustPlaneChris wrote:
scrtsqrl wrote:
PS- Chris, what plane are you building?


This: http://www.zenithair.net/introduction-cruzer/

It's not a curvy beauty like the one you're selling, but it's about as simple to build as metal airplanes get. Ben used his fancy CNC machine to do my wing rib form blocks, which will save a bit of tedious tracing and cutting. :)


That's an awesome airplane. Are you posting your progress somewhere? Be nice to watch.
:)

Author:  JustPlaneChris [ Mon May 30, 2016 7:01 pm ]
Post subject:  Re: RC Today Show 159: The Finale

Thanks! I have no progress to report yet, I'm still getting my workshop put together. :face

Once I do, I will probably post to my old stagnant justplanechris.com page.

Author:  Notorious B.E.N. [ Mon May 30, 2016 7:20 pm ]
Post subject:  Re: RC Today Show 159: The Finale

Well sad to see you guys go but thanks for the entertainment and information. I made some good progression during the RC Today Show time.

Nevertheless things change and life happens. It's happening to me as well so I understand where everyone is coming from. I plan to maintain some level of activity in the hobby and who knows I might be more involved in a year. For now, I'm just going to have fun when I can.

Do you plan to keep the forums going Chris?

Author:  Only Fine Helis [ Mon May 30, 2016 7:39 pm ]
Post subject:  Re: RC Today Show 159: The Finale

We miss you guys and your work on the RC today show.

Thanks for your support of me and Only Fine Helis and I hope to run into you again down the road.

Author:  JustPlaneChris [ Mon May 30, 2016 8:01 pm ]
Post subject:  Re: RC Today Show 159: The Finale

Thanks for the kind words, guys! The forums and site will stay up, I pay for the hosting for my own site anyway and it's not like they take any effort on my part. :)
Shannon, we were glad to help. Hopefully we did some good for you. :)

Page 1 of 2 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/