It is currently Thu Dec 14, 2017 9:08 am

All times are UTC - 6 hours




Post new topic Reply to topic  [ 28 posts ]  Go to page 1, 2, 3  Next
Author Message
 Post subject: EZnov Neuron
PostPosted: Mon Jun 22, 2015 10:30 am 
Offline

Joined: Mon Aug 05, 2013 12:24 pm
Posts: 28
EZnov is very (VERY) proud to annonce its new line of flight controlers 100% made in France (designed and produced in France in our office).

It's composed of two flight stabilizers of the latest generation :

NEURON

Image

Hardware :
Latest generation, 9 axis sensor (MPU-9250)
Latest generation STM32F4 microcontroler with floating point unit
Rock solid power stage (no more sat locks) up to 8.4V
Very small : 23.15 x 34.5 x 13.6 mm
6.7g weight
External USB connector for more installation flexibility (cable and adapter provided in the box)
Unplug the USB adapter and you can plug a Bluetooth module instead (same cable).
3 bottom case colors to customize your unit (time limited offer)
Every connector is electrically protected
3M Very High Bond double sided pad provided

Features:
Handles (via different firmwares available to everyone without additional cost) all size helicopters, quads and planes with the same level of performance.
Built-in RPM governor
One built-in sat connector with smart bind (no bind plug nor PC needed to bind)
You can connect a second sat via an adapter
Handles all serial output receivers (HoTT, SRXL, SBUS/SBUS2, JR XBus Mode B and Mode A, PWM sum of course, plus DSM2 and DSMX sats), one wire per channel receivers are supported through an adapter (e.g. SBUS)

Software:
Extreme performance, incredible feeling
Setup and tuning as simple as possible
FREE setup terminal on PC (USB and BT) and Android (BT), all features availables, including firmware update, load/save configuration (compatible files between PC and Android)
iPhone software is work in progress, via a specific Bluetooth Low Energy device available later
Receiver auto-configuration, the unit detects the receiver type and configures automatically the channel assignment, throws, neutrals, reverses, etc at each startup.
Each firmware type (quad, heli, plane) has its own GUI, software user interface is totally adapted for each model type
Upgrading firmware doesn't mean upgrading PC / Android software. You can upgrade one unit's firmware and keep another one on a previous firmware, each one will have the adequate user interface.
RPM governor auto-configuration, ne need to set gear ratio, etc. just plug the sensor, setup a flat throttle curve and fly (both nitro and elec)
Rescue mode for helis, with pitch management
Self level mode for quads and planes

Introductory pricing: 130€ (approx $150)
Available: VERY SOON (production already started!)



AND BIG BROTHER WITH NO OFFICIAL NAME YET

Image


ULTRA POWERFUL latest generation microcontroler STM32F4 with floating point unit
10 connectors for a high power installation and plug tons of servos
2 smart bind sats connectors
Support for H4 helis, hexacopters, octocopters, planes with multiple servos per function, etc.
Built-in barometer (altitude hold)
Support for external GPS (position hold)
Built-in FLASH memory for complete logging of any flight parameter, and analyse them directly in the software

Available in: a few months

Thomas.


Top
 Profile  
 
 Post subject: Re: EZnov Neuron
PostPosted: Mon Jun 22, 2015 10:42 am 
Offline

Joined: Mon Jun 22, 2015 10:36 am
Posts: 5
And his amazing "rescue" mode :)


Top
 Profile  
 
 Post subject: Re: EZnov Neuron
PostPosted: Mon Jun 22, 2015 10:55 am 
Offline
User avatar

Joined: Mon Jul 25, 2011 11:58 am
Posts: 4809
Location: Austin, TX
Wow, very cool! Thanks for sharing this here Thomas. :thumbup:

_________________
Chris Boultinghouse


Top
 Profile  
 
 Post subject: Re: EZnov Neuron
PostPosted: Mon Jun 22, 2015 11:09 am 
Offline

Joined: Mon Jun 22, 2015 10:36 am
Posts: 5
If you have any questions don't hesitate to ask, am proud to be one of the different beta pilots who had the great chance to work with Thomas for the try-in-fly test :)


Top
 Profile  
 
 Post subject: Re: EZnov Neuron
PostPosted: Mon Jun 22, 2015 12:03 pm 
Offline

Joined: Sun Jul 31, 2011 6:45 pm
Posts: 1550
Location: McKinney, TX
Do we get free French pastry with every unit? :)

The Neuron looks nice and should handle most helicopters (4-servo swash helis being the exception).

Is there any chance that it could be supported in some of the telemetry systems so that tweaks can be made in the radio?

_________________
Alan
Team Shannon (Only Fine Helis)
DT520E V2, Protos Max V2, Nighthawk 250 Pro FPV quadcopter
ParkZone P-51 BL, Hobby King Skipper


Top
 Profile  
 
 Post subject: Re: EZnov Neuron
PostPosted: Mon Jun 22, 2015 12:08 pm 
Offline
User avatar

Joined: Mon Jul 25, 2011 11:58 am
Posts: 4809
Location: Austin, TX
*Cough*Taranis*Cough* :lol:

_________________
Chris Boultinghouse


Top
 Profile  
 
 Post subject: Re: EZnov Neuron
PostPosted: Mon Jun 22, 2015 12:13 pm 
Offline

Joined: Mon Jun 22, 2015 10:36 am
Posts: 5
One croissants and one pain au chocolat can't be send in a good time to insure the good French quality ;)


Top
 Profile  
 
 Post subject: Re: EZnov Neuron
PostPosted: Mon Jun 22, 2015 12:16 pm 
Offline

Joined: Mon Jun 22, 2015 10:36 am
Posts: 5
TheBum wrote:
Is there any chance that it could be supported in some of the telemetry systems so that tweaks can be made in the radio?

Would you please be more precise for the tweaks you're talking about ?


Top
 Profile  
 
 Post subject: Re: EZnov Neuron
PostPosted: Mon Jun 22, 2015 12:18 pm 
Offline
User avatar

Joined: Mon Jul 25, 2011 11:58 am
Posts: 4809
Location: Austin, TX
I think he means something similar to how VBar Control works, or how the Jeti system can now be used to set up and configure some flight control units (Spirit).

_________________
Chris Boultinghouse


Top
 Profile  
 
 Post subject: Re: EZnov Neuron
PostPosted: Mon Jun 22, 2015 12:49 pm 
Offline

Joined: Sun Jul 31, 2011 6:45 pm
Posts: 1550
Location: McKinney, TX
JustPlaneChris wrote:
I think he means something similar to how VBar Control works, or how the Jeti system can now be used to set up and configure some flight control units (Spirit).

Or how the Graupner system can be used to set up two receiver models that have embedded FBL controllers.

In the Graupner case, a 3rd party FBL controller would have to masquerade as a supported sensor type for identification purposes. Then there's a standard text-based protocol that can be used to build menus and such.

_________________
Alan
Team Shannon (Only Fine Helis)
DT520E V2, Protos Max V2, Nighthawk 250 Pro FPV quadcopter
ParkZone P-51 BL, Hobby King Skipper


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 28 posts ]  Go to page 1, 2, 3  Next

All times are UTC - 6 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group